Mélangeur et pompe CLIVIO

French

FOR CEMENT GROUT, COLLOIDAL GROUT AND CHEMICAL GROUT

2pse

The grouting set CLIVIO mod. 2PSE/E+TM130 E is designed to meet operational needs in small spaces...

The pump is combined with a small turbmixer, in order to obtain a complete unit for the mixing and the injection operation all electric or hydraulic driven.

The grout delivery rate can be adjusted directly by the electrical panel or, in the case of application in groups to hyraulic operation, can be controlled through a valve speed.

A safety velve discharge the pressure of the sustem in case of overpressure. The system is particularly suitable for geothermal applications or injections of micropiles and tie rods.

WEIGHT AND DIMENSIONS
Width (mm) 1110
Length (mm) 800
Height (mm) 1650
Weight (kg) 320

 

Equipment

Delivery max

litri/min.

Pressure max

bar

Pistons

Pistons Diameter

mm

Electric Motor

kW

2PS/E 30 20 2 50 3
Equipment

Total

Capacity

litri

Working

Capacity

litri

Speed vertical

shaft

giri/min.

Theoretical

delivery pump

lt/min.

Theoretical

pressure Pump

bar

Engine

power

kW

TM130 130 100 1500 300 2 3

 (All data, illustrations and features are subject to change without notice or liability)

FOR CEMENT AND CHEMICAL MIXTURES GROUTING

agitators

The AGITATORS are made of single steel tank, width vertical shaft carrying blades, cover tank and discharge tap. The transmission is made by motor with electrical or pneumatic functioning. Usually the Clivio Agitators are assembled with our Clivio mixer TM and our pumps (injector) series AP - MP - DP.

Modell

Theorical

capacity

lt.

Work

capacity

lt.

Speed vertical

shaft

rpm

Motor

kW

Length

mm

Width

mm

Height

mm

Weight

kg

A200 220 200 60 1,1 900 900 1700 180
A200A 220 200 60 Air 1,1 900 900 1600 150
A500R 500 450 63 2,2 1200 900 1850 320
A500RA 500 450 63 Air 3,6 1000 900 1800 290
A750R 810 750 63 3 1400 1100 1850 340
A750RA 810 750 63 Air 3,6 1200 1100 1800 310
A1000 1130 1010 63 3 1500 1300 1850 420
A1000A 1130 1010 48 Air 3,6 1300 1300 1800 390
A2200 2400 2200 57 3 1515 1510 2250 680

(All data, illustrations and features are subject to change without notice or liability) 

FOR CEMENT GROUT, CHEMICAL GROUT, OTHER MIXTURES - ELECTRIC DRIVEN

DP/4M

Grout Injection Unit CLIVIO model DP/4M + 5M is designed to particularly meet the problems of consolidation works, micropiling, anchor holes and every where valves piles fracture is concerned (tube a machete).

The unit is consisting of:

- grout injector pump CLIVIO model DP/OL-4 electro-hydraulic driven

- Double a tank mixer CLIVIO model 5M electric-driven

The whole is mounted on a steel frame including the electric panel with pump control switches HP/LP (high/low pressure) and on/off electric motors.

Lifting points have been placed for a pompt and safe site setting.

CLIVIO supply a complete ine of machines for THE WHOLE GROUTING WORK: drill units, grout pumps, high speed mixers and all accessories.

 
Machine

Theor. Capacity

each tank

Litre

Work capacity

each tank

litre

Shaft rpm   

Electric motor

kW

5M 220 200 96 2
Machine

Delivery max

Lt/min.

Pressure max

bar

Delivery R.G. max

Lt/min.

Delivery R.G. max

bar

 
DP/OL-4   30 45 3

DP/OL-4 RGM

AP/BP manual

9 85 30 45 3

DP/OL-4 RGA

AP/BP automatic

9 85 30 45 3
Length (mm) Width (mm) Height (mm) Weight (kg)
1600 1300 1700 470

(All data, illustrations and features are subject to change without notice or liability) 

FOR GROUT INJECTION AND SPECIAL MIXTURES

dp/ol-4

DP/OL-4 is an vertical grouting pump which is designed to suit modular assembling.

Light weight, compact, esay to handle both in restricted area than in sites difficult to reach. It makes esay also severe working problems.

Our grout injection pump DP/OL-4 is consisting of a cylinder with a double acting piston, and overlapped ball valves. It is electro-hydraulic driven, equipped with a pressure and flow governor for a better use. All hydraulic working parts are easily accessible for easy maintenance. As pump is made by only few pieces the maintenance is extremely easy and at low cost.

Our grouting pump mo. DP/OL-4 can work for minipiles injections, tunnel liner grouting, rock anchor grouting, void filling etc...

The DP/OL-4 RG is equipped with a special distributor and can work for manchettes grouting and cracking. In this case a double pair of values are preset: max delivery at low pressure (LP) and max pressure (HP) at low delivery (for cracking).

The distributor is hand operated or automatic operated through magnetic valave equipped also with strokes and cycles recorder in its own board which is installed on the desk.

Grouting pumps DP/OL-4 and DP/OL-4 RG use also assembled in more units in a container with one feeder tank only and an injection line each pump.

 
TECHNICAL DATA DP/OL - 4 DP/OL - 4 RG DP/OL - 4 RG VP
Grout diameter piston mm 85 85 85
Piston run mm 120 120 120
Max strokes Strokes p.m. 79 85 116
Grout pressure (BP) bar 0 - 44 0 - 40 0 - 50
Grout delivery (BP) litre p.m. 0 - 27 0 - 30 0 - 40
Break pressure pipe (AP) bar ... 85 85
Break delivery pipe litre p.m. ... 9 9
Grout inlet gas 1"1/2 1"1/2 1"1/2
Grout outlet gas 3/4" 3/4" 3/4"
Power kW 3 3 4
Length mm 750 750 750
Width mm 500 500 500
Height mm 1600 1600 1600
Weight kg 180 190 190

(All data, illustrations and features are subject to change without notice or liability) 

FOR CEMENT GROUT, CHEMICAL GROUT, OTHER MIXTURES

MP/A-2

Grout injection units CLIVIO mod. MP/A-2-MA200A have been designed to meet the technical requirements of the customer and are configured to satisfy the specific operational requirements.

Grouting units MP/A-2-MA200A consist of:

- M200A -Mixer CLIVIO air driven

- A200A - Agitator CLIVIO air driven

- MP/A-2 - Pump (injector) CLIVIO air driven.

All machines of the grout injection unit are arranged in a functional way on a single base frame (on request with 4 jack, rubber wheels and parking brake) and centralized control panel to be ready for use.

Particularly suitable in those sites where the compressed air is available at low cost. The use of a group so compact and light greatly reduces the installation time on site and requires minimal maintenance.

CLIVIO supply a complete line of machines for THE WHOLE GROUTING WORK: dill units, grout pumps, high speed mixers and all accessories. 

Model

Total capacity

Litres

Work capacity

Litres

Shaft speed

rpm

Air driven

kW

M200A 220 200 130 1,1
A200A 220 200 130 1,1
Model

Piston diameter

mm

Maximum delivery

l/min

Maximum pressure

Bar

Maximum flow and pressure values cannot be reached simultaneously
MP/A-2 50 / 60 / 70 / 80 28 / 41 / 55 / 72 60 / 42 / 31 / 23

Lenght

mm

Width

mm

Height

mm

Weight

kg

Air consumption at 7 bar

L/min.

1900 1420 1500 670 4350

(All data, illustrations and features are subject to change without notice or liability) 

FOR CEMENT GROUT, CHEMICAL GROUT, OTHER MIXTURES - AIR DRIVEN

psa

Grout injection unit CLIVIO mod. PS/A-MA140A is air driven and is designed to particularly meet consolidation works in restricted areas where electrical current is not available and where small grouting and low pressure works are required (restauration works, micro pile, foundation, consolidation etc.).

Grout injection unit PS/A-MA140A is composed of:

- M140/A - Mixer CLIVIO air driven

- A140/A - Agitator CLIVIO air driven

- PS/A - Pump (injector) CLIVIO air driven

All moving parts duly protected with steel welded. All machines of the grout injection unit are arranged in a functional way on a single base frame (on request with 4 jack, rubber wheels and parking brake) and centralized control panel to be ready for use.

Particularly suitable in those sites where the compressed air is available at low cost. The use of a group so compact and light greatly reduces the installation time on site and requires minimal maintenance.

Model

Total capacity

Litres

Work capacity

Litres

Shaft speed

rpm

Air driven

kW

M140A 140 120 130 1,1
A140A 140 120 130 1,1
Model

Piston diameter

mm

Maximum delivery

l/min

Maximum pressure

Bar

Maximum flow and pressure values cannot be reached simultaneously
PSA 50 15 24

Lenght

mm

Width

mm

Height

mm

Weight

kg

Air consumption at 7 bar

L/min.

1550 950 1250 240 3000

(All data, illustrations and features are subject to change without notice or liability) 

FOR CEMENT GROUT, CHEMICAL GROUT, OTHER MIXTURES

tad40

Is designed to meet particularly the problems of consolidation works, micro piling, anchor hole and where valves pipes fracture system is concerned (HP-LP). All machines are properly placed on a single iron welded base for easy operation and prompt site setting.

Grouting unit T.A.D. 40 consists of:

- High-speed mixer mod. TM 260, capacity tank 200 litres - 7,3 kW electric motor

- Agitator mod. A 500, capacity tank 450 litres - 2,2 kW electric motor

- Grouting pump mod. DPOL4 RGM electro-hydraulic, delivery BP 40 litres min.

- pressure 40 bar max, delivery HP 9 litres min. - pressure 85 bar max, 3 kW electric motor.

CLIVIO supply a complete line of machines for THE WHOLE GROUTING WORK: dill units, grout pumps, high speed mixers and all accessories.

 
Machine

Total capacity

Litre

Work capacity

Litre

rpm/min.

Electric motor

kW

TM260 240 200 1450 7,5
A500 500 450 97 2,2
Machine

Max delivery

litre/min

Max pressure

bar

Electric motor kW
AP BP AP BP
DP/OL-4 RGM 9 40 85 40 3
Length (mm) Width (mm) Height (mm) Weight (Kg) Maximum flow and pressure values cannot be reached simultaneously
3100 1130 1750 930

(All data, illustrations and features are subject to change without notice or liability) 

HIGHSPEED MIXERS FOR CEMENT GROUT, COLLOIDAL GROUT, BENTONITE, OTHER MIXTURES

tm260 / tm500

High-speed mixer CLIVIO "TM" in particularly designed to produce colloidal grout. The high shear action of our special centrifugal pump and the high grout vortex caused inside the tank produce a colloidal grout. Our high-speed mixers TM may produce various types of cement grouts and chemical grouts. They are also working on jet grouting plant. Robust design and reliability are the main features of our high-speed mixers TM. Normally prime power mover is electric, on request pneumatic or hydraulic. On request we manufactre complete grouting units on a single steel base. Acessories: charging plate with hopper and water metering gauge.

Model

Theorical

capacity

lt

Work

capacity

lt

Speed

vertical

shaft

rpm

Theorical

delivery pump

bar

 

Theorical

pressure pump

bar

 

Engine

power

kW

Air consumption at

1500 rpm and 7

bar N litre

TM260  260  200   1500   600   2,5   7,5  
TM260A 5,5   6000
TM500  610  500  1500  600   2,5  7,5   
 TM500A 5,5   6000
Model Length (mm) Width (mm) Height (mm) Weight (kg) tm260
TM260 1530 970 1350 335
TM260A 1530 305
TM500 2010 1450 1350 420
TM500A 390

(All data, illustrations and features are subject to change without notice or liability) 

FOR WATER, CEMENT GROUT, BENTONITE AND SPECIAL MIXTURE

t300 / t400

TRIPLEX Pumps CLIVIO mo. T 100 - T 200 - T 300 - T 400 are plunging pistons with stuffing box and continuous pistons washing system, this CLIVIO pumps work with fluids of various densities and nature.

Rugged, dependable, simple ans practically no maintenance required.

Main features are: high strength steel gears and shafts, thick chromium plated steel plungers, special cast iron crankcase and pimping section, cap valves or ball valves, piston seals in synthétic material.

Machine Motor (kW) rpm/min. Gearbox

Maximum

delivery

litre/min.

Maximum

working

pressure bar

Maximum pressure

bar

Weight

kg

T300 diesel 30 1500 1 82 50 60 2000
2 159 50 60
3 309 40 50
T400 diesel 30 1500

1

113

50

60

2100

2

220

50

55

3

428

40

40

T300 electric

 

30

 

1450

1

78

50

60

1800

2

153

50

60

3

300

40

55

T400 electric

 

30

 

1450

1

109

50

60

1900

2

212

50

55

3

413

35

40

Machine Length (mm) Width (mm) Height (mm)
T300 e T400 diesel 3050 1850 1900
T300 e T400 electric 3050 1850 1900

(All data, illustrations and features are subject to change without notice or liability) 

FOR WATER, CEMENT GROUT, BENTONITE AND SPECIAL MIXTURE

t202

TRIPLEX Pumps CLIVIO mo. T 100 - T 200 - T 300 - T 400 are plunging pistons with stuffing box and continuous pistons washing system, this CLIVIO pumps work with fluids of various densities and nature.

Rugged, dependable, simple ans practically no maintenance required.

Main features are: high strength steel gears and shafts, thick chromium plated steel plungers, special cast iron crankcase and pimping section, cap valves or ball valves, piston seals in synthétic material.

Machine rpm/min. Gearbox

Maximum

delivery

litre/min.

Maximum

working

pressure bar

Maximum pressure

bar

Diesek

LOMBARDINI

LDW 1603

2300 70 50 60
123 50 55
226 45 50

Electric motor

18,5 kW

1450 66 60 65
122 50 60
225 45 50
Machine Length (mm) Width (mm) Height (mm) Weight approx (kg)
T202 diesel 2800 1450 1350 1070
T202 electric 2800 1450 1650 900

(All data, illustrations and features are subject to change without notice or liability)

Pages

Copyright Geotechno 2024 -